服務熱線
13430557816
產品分類CLASSIFICATION
新品推薦PRODUCTS
Circuit Schematic for IEPE Sensors
Integrated Electronic Piezo Electric (IEPE) type sensors require a constant current source for proper operation. Various methods can be used to provide constant current. The circuit below is recommended to provide 4 mA constant current at room temperature for powering IEPE sensors. The capacitor at “Sensor +" AC coupled the output signal, blocking the DC voltage. The current temperature coefficient is about to 0.25%/deg C.
T1 ａnd T2 can be most of PNP type transistor, such as 3906, 9012 etc.
R1, 165 ohm, sets the constant current level, Decreasing the value will increase the current, and vice versa.
R2, 51k ohm typical. Precision is not important.
上一篇 : 電渦流傳感器的應用汽輪機上與測量時的安裝要求
下一篇 : 壓電加速度傳感器的靈敏度與量程應如何選擇？
